8 Discussions and CommentsMember since Feb. 5, 2013
I just bought a 5001 recently and it's truly a beautiful watch. I got a floor model since they were sold out otherwise.
There is one thing I'd like some community feedback on regarding time setting, I feel there is a very slight "grit" to it. I guess the best way to describe it is that I can "feel the gears" rather it being a totally smooth action with no feedback.
I tested with with my other automatics and didn't notice this. Could somebody else with a Caliber 50000 movement see if they can feel something similar when setting time?
I realize I'm probably just going through new ownership paranoia but nevertheless, better safe than having to pay $600 for servicing a few years later because they failed to properly oil the bearings or something.
3,742 Discussions and CommentsMember since March 22, 2001
It's really impossible to diagnose your experience or compare it over the forum, or via email. While I have several cal. 5xxx watches - I could not necessarily compare what you describe or determine if inde, you are experiencing an issue.
My recommendation, would be to visit the Authorized Dealer where you purchased the watch. If they have another cal. 5xxx automatic watch there - even if slightly difference, in the same Portuguese family in the case, perhaps you can compare the experience.
Certainly, watches like this may need a little time to settle in and you will not be setting it every day because of the power reserve - But, if it makes you feel better - take it back to dealer and compare to others and share your concern with the sales person. Have them contact IWC if they cannot put your mind at ease. You have a 2 year warranty - so you could wait at least another year, and if you have other issues - this can get resolved....
8 Discussions and CommentsMember since Feb. 5, 2013
I've managed to figure it out so let me close this thread.
For future reference, the "grit" is caused by play in the crown-stem rubbing against the case. If you try winding the watch with the crown faced upwards so you are not pushing it against the case, you'll notice the grit will be gone.
There is one thing I'd like some community feedback on regarding time setting, I feel there is a very slight "grit" to it. I guess the best way to describe it is that I can "feel the gears" rather it being a totally smooth action with no feedback.
I tested with with my other automatics and didn't notice this. Could somebody else with a Caliber 50000 movement see if they can feel something similar when setting time?
I realize I'm probably just going through new ownership paranoia but nevertheless, better safe than having to pay $600 for servicing a few years later because they failed to properly oil the bearings or something.
Thanks!
My recommendation, would be to visit the Authorized Dealer where you purchased the watch. If they have another cal. 5xxx automatic watch there - even if slightly difference, in the same Portuguese family in the case, perhaps you can compare the experience.
Certainly, watches like this may need a little time to settle in and you will not be setting it every day because of the power reserve - But, if it makes you feel better - take it back to dealer and compare to others and share your concern with the sales person. Have them contact IWC if they cannot put your mind at ease. You have a 2 year warranty - so you could wait at least another year, and if you have other issues - this can get resolved....
Regards,
Ardoise
When turning the crown while setting time, do you feel any feedback at all? Is the resistance smooth and consistent or is it slightly "bumpy".
Last edited: 28 February, 2013 - 03:03
For future reference, the "grit" is caused by play in the crown-stem rubbing against the case. If you try winding the watch with the crown faced upwards so you are not pushing it against the case, you'll notice the grit will be gone.